High-speed silicon-steel cut-to-length line control
A comparison of Winlion and astronic CCM450 cutting-efficiency curves at 70% speed, using 1500T / SIMOTION control.
Our blog
Remote maintenance with TIA Portal V15 and later
An archived application note describing remote commissioning through TIA Portal Cloud Connector and an on-site PC.
EPLAN 2.7 installation notes for Windows 10
Archived notes on language selection, the expert menu and HASP driver updates when installing EPLAN 2.7 on Windows 10.
S7-1200 reference documents
Original download links for S7-1200 example projects, the system manual and EASY PLUS V2.5.
Software downloads commonly requested by customers
Original download links for ProSave, SIMATIC Automation Tool and STEP 7-Micro/WIN V4.0.
High-speed rewinders for wallpaper, self-adhesive paper and label stock
A 600 mm wide rewinder for 25–100 g/m² stock, with manual magnetic-particle tension control and a design speed of 100 m/min.
WinCC Pack & Go (V14): requirements when the application will not run
The original installation note lists a 64-bit operating system, Visual C++ 2015 x64 and .NET Framework 4.6.1 as Pack & Go requirements.
Siemens servo-motor selection reference
A 2013 selection reference covering Siemens 1PH8, 1FK7, 1FT7, 1FN and 1FW motors.
Control systems for extrusion coating and laminating lines
Integrated tension, temperature and coating-thickness control, with production-data logging and remote maintenance.
All-servo control for independent-arm centre-winding gantry slitters
A common-DC-bus servo tension-control system for slitters operating at up to 600 m/min.
Tension control for solventless laminators
Complete solventless-laminator control using 1500T / SIMOTION, with dancer and load-cell feedback, taper tension and non-stop roll changes.
Electronic gearing, camming and rotary knives
Electronic cam control for rotary cutting, registration-mark tracking, creasing, punching and other operations on moving material.
Tension control
Tension control for film, paper, nonwovens and metal foil: winding, unwinding, load-cell and dancer feedback, and non-stop roll changes.